Cleaning and Refueling for Spindles.
This machine works based on the principle of negative pressure to extract used oil from inner tube and filter through fuel strainer, then the cleansed oil will be automatically refueled into the inner tube at fixed quantity, which cleans the inner tube concurrently, the whole process of cleaning and refueling inner tube takes only 3-5 seconds.
Back
Cleaning and Refueling for Spindles.
1.Inner Side of High Precision Filter
2.Outside of High Precision Filter
3.Cleaning and Refueling Nozzel
4.Electrical Motor Pump
5.Pressure Gauge
6.Oil Filter
1.Effective Cleaning
Works based on the negative pressure so the fuel injection quantity is large, and the cleaning of inner tube is thorough because the extraction and injection works concurrently.
2.Simple
and Fast
Only requires one man to finish the cleaning and refueling process using one oil tank and one nozzle, the whole operation is simple and fast.
3.Effective
The refueling is fast and effective, each spindle takes only 3-5 seconds.
4.High
Safety Coefficient
Using pure negative pressure source, the operation is safe and no need to pre-rising or adjust pressure, and eliminated the possibilities of tube burst and oil blow.
5.Stable
Performance and Low Maintenance Cost
The main body is durable in use and uniquely designed and made by steel parts, the performance is stable and the maintenance cost is low because of minimum use of quick-wear parts.
6.Oil
Saving and Environment Friendly
The used oil is recyclable after filtration through high precision strainer, the consumption of oil is low which saves use cost and more environment friendly.
7.Wide
Application Range
You Lian’s patented products were built
according to the using habit of domestic textile customers and widely applied.
This machine is suitable for inner tube
cleaning and refueling on high speed pin roller bearing spindles that applies
to textile equipment, includes spinning machine、yarn twisting machine、twisting
machine etc,.